A “LAMP stack” is a combination of operating system and software which enables you to host websites and web apps on your server.
The term “LAMP” stands for Linux, Apache, MySQL/MariaDB and PHP.
- Apache: Runs the web server
- MySQL/MariaDB: Stores website data
- PHP: Processes web content
Here will see how to setup LAMP server on Ubuntu 16.04
Install Apache
The Apache web server is among the most popular web servers in the world. It’s well-documented, and has been in wide use for much of the history of the web, which makes it a great default choice for hosting a website.
We can install Apache easily using Ubuntu’s package manager, apt. A package manager allows us to install most software pain-free from a repository maintained by Ubuntu.
For our purposes, we can get started by typing these commands:
# apt-get update # apt-get install apache2
apt will tell you which packages it plans to install and how much extra disk space they’ll take up. Press Y and hit Enter to continue, and the installation will proceed.
Set Global ServerName to Suppress Syntax Warnings
Next, we will add a single line to the /etc/apache2/apache2.conf file to suppress a warning message. While harmless, if you do not set ServerName globally, you will receive the following warning when checking your Apache configuration for syntax errors:
# apache2ctl configtest
Output
AH00558: apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1. Set the 'ServerName' directive globally to suppress this message
Syntax OK
Open up the main configuration file with your text edit:
# vim /etc/apache2/apache2.conf
Inside, at the bottom of the file, add a ServerName directive, pointing to your primary domain name. If you do not have a domain name associated with your server, you can use your server’s public IP address:
ServerName server_domain_or_IP
Save and close the file when you are finished.
Next, check for syntax errors by typing:
# apache2ctl configtest
Since we added the global ServerName directive, all you should see is:
Output Syntax OK
Restart Apache to implement your changes:
# systemctl restart apache2
You can now begin adjusting the firewall.
You can do a spot check right away to verify that everything went as planned by visiting your server’s public IP address in your web browser
http://your_server_IP_address
You will see the default Ubuntu 16.04 Apache web page, which is there for informational and testing purposes. It should look something like this:
Install MySQL
Now that we have our web server up and running, it is time to install MySQL. MySQL is a database management system. Basically, it will organize and provide access to databases where our site can store information.
Again, we can use apt to acquire and install our software. This time, we’ll also install some other “helper” packages that will assist us in getting our components to communicate with each other:
# apt-get install mysql-server
Again, you will be shown a list of the packages that will be installed, along with the amount of disk space they’ll take up. Enter Y to continue.
During the installation, your server will ask you to select and confirm a password for the MySQL “root” user. This is an administrative account in MySQL that has increased privileges. Think of it as being similar to the root account for the server itself (the one you are configuring now is a MySQL-specific account, however). Make sure this is a strong, unique password, and do not leave it blank.
When the installation is complete, we want to run a simple security script that will remove some dangerous defaults and lock down access to our database system a little bit. Start the interactive script by running:
# mysql_secure_installation
You will be asked to enter the password you set for the MySQL root account. Next, you will be asked if you want to configure the VALIDATE PASSWORD PLUGIN.
Warning: Enabling this feature is something of a judgment call. If enabled, passwords which don’t match the specified criteria will be rejected by MySQL with an error. This will cause issues if you use a weak password in conjunction with software which automatically configures MySQL user credentials, such as the Ubuntu packages for phpMyAdmin. It is safe to leave validation disabled, but you should always use strong, unique passwords for database credentials.
Answer y for yes, or anything else to continue without enabling.
VALIDATE PASSWORD PLUGIN can be used to test passwords and improve security. It checks the strength of password and allows the users to set only those passwords which are secure enough. Would you like to setup VALIDATE PASSWORD plugin? Press y|Y for Yes, any other key for No:
You’ll be asked to select a level of password validation. Keep in mind that if you enter 2, for the strongest level, you will receive errors when attempting to set any password which does not contain numbers, upper and lowercase letters, and special characters, or which is based on common dictionary words.
There are three levels of password validation policy: LOW Length >= 8 MEDIUM Length >= 8, numeric, mixed case, and special characters STRONG Length >= 8, numeric, mixed case, special characters and dictionary file Please enter 0 = LOW, 1 = MEDIUM and 2 = STRONG: 1
If you enabled password validation, you’ll be shown a password strength for the existing root password, and asked you if you want to change that password. If you are happy with your current password, enter n for “no” at the prompt:
Using existing password for root. Estimated strength of the password: 100 Change the password for root ? ((Press y|Y for Yes, any other key for No) : n
For the rest of the questions, you should press Y and hit the Enter key at each prompt. This will remove some anonymous users and the test database, disable remote root logins, and load these new rules so that MySQL immediately respects the changes we have made.
At this point, your database system is now set up and we can move on.
Install PHP
PHP is the component of our setup that will process code to display dynamic content. It can run scripts, connect to our MySQL databases to get information, and hand the processed content over to our web server to display.
We can once again leverage the apt system to install our components. We’re going to include some helper packages as well, so that PHP code can run under the Apache server and talk to our MySQL database:
# apt-get install php libapache2-mod-php php-mcrypt php-mysql
This should install PHP without any problems. We’ll test this in a moment.
In most cases, we’ll want to modify the way that Apache serves files when a directory is requested. Currently, if a user requests a directory from the server, Apache will first look for a file called index.html. We want to tell our web server to prefer PHP files, so we’ll make Apache look for an index.php file first.
To do this, type this command to open the dir.conf file in a text editor with root privileges:
/etc/apache2/mods-enabled/dir.conf
It will look like this:
# vi /etc/apache2/mods-enabled/dir.conf
<IfModule mod_dir.c> DirectoryIndex index.html index.cgi index.pl index.php index.xhtml index.htm </IfModule>
We want to move the PHP index file highlighted above to the first position after the DirectoryIndex specification, like this:
# vi /etc/apache2/mods-enabled/dir.conf
<IfModule mod_dir.c> DirectoryIndex index.php index.html index.cgi index.pl index.xhtml index.htm </IfModule>
When you are finished, save and close the file by pressing Ctrl-X. You’ll have to confirm the save by typing Y and then hit Enter to confirm the file save location.
After this, we need to restart the Apache web server in order for our changes to be recognized. You can do this by typing this:
# systemctl restart apache2
We can also check on the status of the apache2 service using systemctl:
# systemctl status apache2
Install PHP Modules
To enhance the functionality of PHP, we can optionally install some additional modules.
To see the available options for PHP modules and libraries, you can pipe the results of apt-cache search into less, a pager which lets you scroll through the output of other commands:
# apt-cache search php- | less
Use the arrow keys to scroll up and down, and q to quit.
The results are all optional components that you can install. It will give you a short description for each:
libnet-libidn-perl - Perl bindings for GNU Libidn php-all-dev - package depending on all supported PHP development packages php-cgi - server-side, HTML-embedded scripting language (CGI binary) (default) php-cli - command-line interpreter for the PHP scripting language (default) php-common - Common files for PHP packages php-curl - CURL module for PHP [default] php-dev - Files for PHP module development (default) php-gd - GD module for PHP [default] php-gmp - GMP module for PHP [default] …
To get more information about what each module does, you can either search the internet, or you can look at the long description of the package by typing:
# apt-cache show package_name
There will be a lot of output, with one field called Description-en which will have a longer explanation of the functionality that the module provides.
For example, to find out what the php-cli module does, we could type this:
# apt-cache show php-cli
Along with a large amount of other information, you’ll find something that looks like this:
Output
… Description-en: command-line interpreter for the PHP scripting language (default) This package provides the /usr/bin/php command interpreter, useful for testing PHP scripts from a shell or performing general shell scripting tasks. . PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used open source general-purpose scripting language that is especially suited for web development and can be embedded into HTML. . This package is a dependency package, which depends on Debian's default PHP version. …
If, after researching, you decide you would like to install a package, you can do so by using the apt-get install command like we have been doing for our other software.
If we decided that php-cli is something that we need, we could type:
# apt-get install php-cli
If you want to install more than one module, you can do that by listing each one, separated by a space, following the apt-get install command, like this:
# apt-get install package1 package2 ...
At this point, your LAMP stack is installed and configured. We should still test out our PHP though.
Read More: How to Setup LAMP on Centos
Test PHP on your Web Server
In order to test that our system is configured properly for PHP, we can create a very basic PHP script.
We will call this script info.php. In order for Apache to find the file and serve it correctly, it must be saved to a very specific directory, which is called the “web root”.
In Ubuntu 16.04, this directory is located at /var/www/html/. We can create the file at that location by typing:
# vi /var/www/html/info.php
This will open a blank file. We want to put the following text, which is valid PHP code, inside the file:
info.php
<?php phpinfo(); ?>
When you are finished, save and close the file using :wq!
Now we can test whether our web server can correctly display content generated by a PHP script. To try this out, we just have to visit this page in our web browser. You’ll need your server’s public IP address again.
The address you want to visit will be:
http://your_server_IP_address/info.php
This page basically gives you information about your server from the perspective of PHP. It is useful for debugging and to ensure that your settings are being applied correctly.
You probably want to remove this file after this test because it could actually give information about your server to unauthorized users. To do this, you can type this:
# rm /var/www/html/info.php
You can always recreate this page if you need to access the information again later.